4.2 Knock Level Out

QUICK INFO:

The PLEX KNOCK MONITOR has 2 analog outputs with an output range from 0 to 3.3V that can be used to record

knock level and knock count information with a dynamometer, ecu or external datalogger.

ABOVE KNOCK 

- In this setting when there is no knock the output is 0. When there is knock the output is the level of knock above the threshold.

FULL RANGE 

- By choosing this option the analog output follows the knock sensor signal value.

PEAK / 100RPM

- For each 100rpm increment during a dyno run the peak knock signal recorded is output.