Quick Start

QUICK INFO

For the PBC-PRO to operate the following steps are required:

STEP 1

Connect RED wire to +12V switched power supply. Click here for more detailed instructions.

STEP 2

Connect BLACK wire to chassis or engine ground.Click here for more detailed instructions.

STEP 3

Connect ORANGE wire to boost solenoid connector. Click here for more detailed instructions.

STEP 4

Connect Solenoid connector BLACK wire with ring terminal to chassis or engine ground.Click here for more detailed instructions.

STEP 5

Connect MAP sensor vacuum/boost port to engine intake manifold. Click here for more detailed instructions.

STEP 6

Connect MAP sensor plug to PBC-PRO wiring loom plug. Click here for more detailed instructions.

WARNING!

The device comes preprogrammed with start up settings but the boost limit is set to 100kPa on all presets.

Navigate to menu 2.2 and adjust duty cycle and boost limit parameters to your preferences.