• Contents
  • Index
  • Search
  • Introduction
    • Disclaimer and Warranty
    • Quick Start
    • Datasheet
  • INSTALLATION
    • Box Contents
    • Technical Specifications
    • Wiring Overview
    • Step by step Installation
      • 1. Power supply
      • 2. Solenoid
      • 3. Map sensor
      • 4. Rpm input
      • 5. Vehicle speed input
      • 6. TPS and Air Temp inputs
      • 7. Lambda / AFR display
      • 8. EGT input
        • EGT Sensor Installation
      • 9. Analog output
      • 10.Auxiliary output
      • 11. OBD Can Bus
      • 12. Fuel Pressure sensor
      • 13. Water-Methanol Injection
  • HOW TO
    • Time based boost control
    • Ethanol content measurement
    • Peak boost auto display
    • Boost limit diagnostics
    • Setup closed loop boost control
  • TUNING
    • Functional overview
    • Using the 4 presets
    • Diagnostic Test
    • MENU STRUCTURE
      • 1. Monitor
        • Realtime x1
        • Realtime x2
        • Realtime x4
        • Realtime x8
        • Parameter Selection
        • Boost Warning
        • EGT Warning
        • Shift Warning
        • Select Preset Screen
        • Datalogging Screen
        • VAG TFSI and TSI engine only
        • Porsche 996T engine only
      • 2. Setup Boost Open Loop
        • 2.2 Main Boost duty setup
        • 2.3 RPM solenoid duty % correction
        • 2.4 GEAR solenoid duty % correction
        • 2.5 VSS solenoid duty % correction
        • 2.6 TPS solenoid duty % correction
        • 2.7 AIR Temperature solenoid duty % correction
      • 3. Setup Boost Closed Loop
        • 3.2 Main Boost target setup
        • 3.3 RPM boost target % correction
        • 3.4 GEAR boost target % correction
        • 3.5 VSS boost target % correction
        • 3.6 TPS boost target % correction
        • 3.7 AIR Temperature boost target % correction
        • 3.8 Control Base duty setup
        • 3.9 Control Base duty RPM % correction
        • 3.10 Control loop PID tuning
      • 4. Setup Control
        • 4.2 Control Options Enable
      • 5. Setup Inputs
        • 5.2 RPM Input
        • 5.3 Vehicle Speed Input
        • 5.4 Gear Detection
        • 5.5 Throttle Position Input
        • 5.6 Analog Inputs
        • 5.7 Switch Inputs
        • 5.8 EGT Input
        • 5.9 CAN Bus Setup
        • 5.10 CAN Bus Realtime
      • 6. Setup Outputs
        • 6.2 Solenoid Frequency
        • 6.3 Boost Limit and Warning
        • 6.4 Analog Output
        • 6.5 Shift Light
        • 6.7 Lambda Warning Setup
        • 6.8 Lambda Lean Limit / rpm
        • 6.9 Various Limits and Warnings (WaterT, AirT, LTFT, Knock, FuelP)
        • 6.10 Aux Activation 1
        • 6.11 Aux Activation 2
      • 7. Statistics
        • 7.2 Device Information
        • 7.3 Boost, Rpm, Egt max values
        • 7.4 Boost Histogram
        • 7.5 Device Lock PIN
        • 7.6 Lock Options
      • 8. Load - Save - Lcd
        • 8.2 Presets and Display configuration
        • 8.3 Preset Name Input
        • 8.4 Display Contrast, Brightness, Color
        • 8.5 Device RESET ALL SETTINGS
  • GLOSSARY
  • Go to previous screen